Pentair

Style 1 Pop-Up Head Installation/Removal Tool – Pentair In-Floor(A&A) Plastic

  • Auteur/autrice de la publication :
  • Post category:
  • Commentaires de la publication :0 commentaire

Style 1 Pop-Up Head Installation/Removal Tool - Pentair In-Floor(A&A) Style 1 Pop-Up Head Installation/Removal Tool - Pentair In-Floor(A&A)Old SKU - 522061A&A Manufacturing is now Pentair In-Floor Cleaning & Circulation!Designed to fit ALL Style 1 pop-up heads.Easily adapts to your pool pole so you don't have to get in the water!Installation Instructions:Align the two pins with the corresponding holes on the cleaning head.Twist the cleaning head clockwise 1/4 turn to seat the pop-up in the collar.Twist the cleaning head counter-clockwise 1/4 turn to remove it.ePoolSupply Troubleshooting Tip:If the cleaning head keeps dislodging itself from the floor fitting, try 1 wrap of electrical tape around the locking tabs on the pop-up to help it grip the collar better.

Continuer la lectureStyle 1 Pop-Up Head Installation/Removal Tool – Pentair In-Floor(A&A) Plastic

Low Profile 2″ T-Valve Assembly (Snap-In Style) -Pentair In-Floor(A&A) Pool Part

  • Auteur/autrice de la publication :
  • Post category:
  • Commentaires de la publication :0 commentaire

Low Profile 2" T-Valve Assembly (Snap-In Style) - Pentair In-Floor(A&A)Low Profile 2" T-Valve Assembly (Snap-In Style) - Pentair In-Floor(A&A)Old SKU - 540971A&A Manufacturing is now Pentair In-Floor Cleaning & Circulation!This Tsunami Valve Flap is one of the most important parts of any Pentair In-Floor(A&A) Water Actuator Valve. This newer style flap is designed to snap into the appropriate cutouts located inside the valve housing, unlike the older, messier, glue-in style. Installing the T-Valve is a SNAP! Once in place, the center pin extending from the flap is picked up by the Lower Cam to allow the pressurized water to escape through one of the five or six ports.When it comes to removing the t-valve, we recommend a good pair of needle nose pliers to grab the entire flap down the center and pull upward gently until the part unsnaps from the molded grooves in the valve housing.This part is compatible with the following Pentair In-Floor(A&A) Complete Water Actuator Valves:Low Profile 2" 6-Port T-ValveLow Profile 2" 2-Port T-ValveLow Profile 2" 3-Port T-Valve

Continuer la lectureLow Profile 2″ T-Valve Assembly (Snap-In Style) -Pentair In-Floor(A&A) Pool Part